Lessons Learned from Years with Experts

Lessons Learned from Years with Experts

Steps in Air Duct Cleaning The cleaning of air ducts is integral part in making sure the air that the people breath is fresh and free from pollutants and of course this involves several steps to follow. Air duct cleaning involve different steps that one must follow luckily this article will give more emphasis on those steps. If you want to get rid of mold formation then be sure you know what steps to follow so that problems and huge expenditures can be avoided. Assess the condition of air ducts before cleaning Constant monitoring of the air ducts and other parts of the ventilation system will avoid getting bigger problems plus this helps you determine potential problems with the air flow system. It is a wise move on your part to seal any leakage on the air ducts, this way you can avoid spending more on the maintenance services. If there are clogged filters then the best thing to do is replaced it with an efficient pleated filter or an electrostatic filter. Before cleaning the air ducts, it would be best if you check for any mold formation in the air duct system. If the ductwork is made from metal sheets then you must use biocide for cleaning it but if it is made from fiberglass then don’t apply the said chemical. Negative Pressure – ideal way of cleaning the air ducts It is also a must to make use of equipment that utilize negative pressure to get rid of those dirt and particles in the system. If you want to be far from breathing polluted air then you have to make sure dust particles and released to the outdoor air. More often than not, the entire system is subject to negative pressure to remove dirt and clogged particles prior the cleaning process.
Businesses Tips for The Average Joe
The Cleaning Process The first parts of the air duct system that must be cleaned. The cleaning of the air ducts make use of specialized tools such as nylon brushes and a high powered vacuum. For ductwork made from fiberglass, soft-bristled brushes is highly recommended. For those air ducts that utilize insulating material, you must avoid getting it wet for mold infestation might take place and if this happens the best thing to do is replace the entire system. If you want to remove the polluted air then you must utilize return registers. As much as possible you must utilize sealants if you have plans having a fiberglass ducts repaired or free from any leakages, this must be done after cleaning the entire system.
Getting To The Point – Services
Make sure other parts of the system are free from dirt and clogged particles Some of the other parts that must be cleaned are the coil drain pans, humidifier, combustion chamber, blower blades, the heat exchanger surface, plenum, cooling coil, and other important parts of the HVAC system.

Comments are closed.